Renault Clio: Heating resistor relays: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Air Conditioning / Heating / Heating resistor relays: Removal - Refitting

LEFT-HAND DRIVE

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Partially remove seal (1).

• Remove the side panel (2).

• Remove the bolt (3) from the base of the dashboard.
• Unclip the trim piece (4) from the driver's side dashboard lower cover.

• Remove the bolts (5) from the driver's side dashboard lower cover.
• Take out the driver's side dashboard lower cover (6).
• Disconnect the connectors from the driver's side dashboard lower cover (depending on the equipment level).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove:
  • the heating resistor relay box cover (7),
  • the heater resistor relays.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • heater resistor relays,
  • the heating resistor relay box cover (8).

II - FINAL OPERATION

• Connect the connectors to the driver's side dashboard lower cover.
• Position the driver's side dashboard lower cover.
• Refit:
  • the bolts from the driver's side dashboard lower cover,
  • the bolts to the base of the dashboard.
• Clip the trim piece onto the driver's side dashboard lower cover.
• Refit:
  • the side panel,
  • the seal.

RIGHT-HAND DRIVE

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove the glovebox (see Glovebox: Removal - Refitting) (MR 393, 57A, Interior equipment).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip the heater resistor relay box from the dashboard cross member
• Remove:
  • the heating resistor relay box cover (1),
  • the heater resistor relays.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • heater resistor relays,
  • the heating resistor relay box cover (2).
• Clip the heater resistor relay box on the dashboard cross member

II - FINAL OPERATION.

• Refit the glovebox (see Glovebox: Removal - Refitting) (MR 393, 57A, Interior equipment).

READ NEXT: