Renault Clio: Air conditioning: Check

AIR CONDITIONING or CLIMATE CONTROL

Equipment required

Dual-sensor temperature measuring device

Note: When performing RENAULT maintenance, check the air conditioning system at the end of the vehicle's maintenance program so that the engine will be cold.

I - PREPARATION OPERATION FOR THE MEASUREMENT DEVICE

READ NEXT:

 Refrigerant circuit: Check

AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

 Refrigerant circuit: Draining - Filling

AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

 Condenser: Removal - Refitting

AIR CONDITIONING or CLIMATE CONTROL Note: Before removal, use DIALOGYS to check how the condenser is fitted and arranged. There are 2 possibilities: the condenser and cooling radiator cannot be se

SEE MORE:

 Front axle subframe: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG WARNING Do not use the lower arm for support with a lifting system. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle

 Front side door protective strip: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the blanking cover (1). Remove the bolt. Remove the side mounted indicator (2) using a small flat screwdriver. Disconnect the power supply connector. II - REMOVAL OPERATION FOR PART CONCERNED Slide the door rubbing strip towards the rear

© 2016-2025 Copyright Renault Clio Owners Club