Renault Clio: Front left-hand wiring: Connector access

I - LOCATION OF CONNECTORS

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

II - ACCESS TO CONNECTORS

IMPORTANT

Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

WARNING

To prevent damaging the connectors, consult the disconnection procedure (see Connector: Disconnection and reconnection) (Technical Note 6015A, 88A, Wiring).

1 - Access to the R 107 connectors

LEFT-HAND DRIVE

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

RIGHT-HAND DRIVE

Renault Clio. Front left-hand wiring

2 - Access to the R 374 connector

Renault Clio. Front left-hand wiring

3 - Access to the R 67 connector

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

4 - Access to the R 33 connector

Renault Clio. Front left-hand wiring

READ NEXT:

 Front left-hand wiring: Removal - Refitting

LEFT-HAND DRIVE IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

 Engine wiring: Connector access

I - LOCATION OF CONNECTORS R 67 connector (Engine wiring harness/front left-hand wiring connection). Depending on the engine, connection R 67 is composed of three or four connectors. K4J or K4

 Engine wiring: Removal - Refitting

SEE MORE:

 Oil level sensor: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Move the air inlet hose to one side. Disconnect the connector from the oil level sensor. II - OPERATION FOR REMOVAL OF PART CONCERNED Rem

 Clutch master cylinder: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION K4J or K4M or K9K Remove: the battery (see Battery: Removal - Refitting), the air filter box (see Air filter unit: Removal - Refitting). II - OPERATION FOR REMOVAL OF PART CONCERNED Fit a hose clamp on the connection between the

© 2016-2025 Copyright Renault Clio Owners Club