{MAINCONT}

Renault Clio: Passenger compartment temperature sensor: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Air Conditioning / Heating / Passenger compartment temperature sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Passenger compartment temperature sensor: Removal - Refitting

Renault Clio. Passenger compartment temperature sensor: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Passenger compartment temperature sensor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Passenger compartment temperature sensor: Removal - Refitting

II - FINAL OPERATION.

Exterior air temperature sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Exterior air temperature sensor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

Solar radiation sensor: Removal - Refitting

CLIMATE CONTROL

Renault Clio. Solar radiation sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Solar radiation sensor: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Solar radiation sensor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Solar radiation sensor: Removal - Refitting

II - FINAL OPERATION.

READ NEXT:

 Air Conditioning

 Air conditioning: Precautions for the repair

AIR CONDITIONING or CLIMATE CONTROL I - SAFETY IMPORTANT The following must be worn when handling refrigerant: gloves, protective goggles (with side shields if possible). In the event of refrigera

 Air conditioning: Check

AIR CONDITIONING or CLIMATE CONTROL Equipment required Dual-sensor temperature measuring device Note: When performing RENAULT maintenance, check the air conditioning system at the end of the vehicle's

SEE MORE:

  High pressure pump: Removal - Refitting

K9K, and 764 or 772 WARNING Before starting work on the vehicle, obtain: a new plug kit (PART NO. 77 01 476 857), cleaning cloths (PART NO. 77 11 211 707), cleaning product (PART NO. 77 11 224 188). WARNING Parts always to be replaced: the high pressure pipe between the injector rail and th

  Flow actuator: Removal - Refitting

K9K, and 750 or 752 or 766 or 768 IMPORTANT Before carrying out any work on the injection system, check using the Diagnostic tool : that the injector rail is not under pressure, that the fuel temperature is not too high. It is essential to respect the safety and cleanliness advice whenever work

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0043