Renault Clio: Automatic gearbox: Identification

DP0

Renault Clio. Automatic gearbox

The automatic transmission series number can be found in two places: on a label on the hydraulic distributor cover (1) and etched onto the outer casing (2) on the wheel side.

Automatic gearbox oil: Draining - Filling

DP0

Renault Clio. Automatic gearbox

I - OIL SERVICE

Note: Drain the automatic transmission oil when the oil is warm (60

READ NEXT:

 Automatic gearbox: Removal - Refitting

K4M, and DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine undertray, the fr

 Drive plate: Removal - Refitting

K4M, and DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the gearbox (see 23A, Automatic gearbox, Automatic gearbox: Removal - Refitting, 23A-7). II - OPERATION FOR REMOVAL OF PART CONCERNED

 Multifunction switch: Removal - Refitting

DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Shift the selector lever to Neutral. Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the battery tray (se

SEE MORE:

 Engine Compartment Connection Unit

Protection and Switching Unit: Removal - Refitting IMPORTANT Never apply pressure to the engine compartment connection unit joint face (risk of moisture entering). If the joint face is damaged, the unit will need to be replaced. REMOVAL I - REMOVAL PREPARATION OPERATION In the event of replaceme

 K9K, and 766 or 768

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt so as not to damage the crankshaft accessories pulley. I - PARTS TO BE SYSTEMATICALLY REPLACED the timing belt, the timin

© 2016-2025 Copyright Renault Clio Owners Club