Renault Clio: Centre front panel: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Centre front panel: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Centre front panel: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

READ NEXT:

 Interior rear-view mirror: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Unclip: the upper cover, the lower cover. Note: When removing the rear view mirror, be careful not to damage the rain sensor nearby. Disc

 Dashboard cover gaiter: Removal - Refitting

IMPORTANT Before carrying out any work on or near a safety system component, lock the airbag computer using the Diagnostic tool. When this function is activated, all the trigger lines are disabled an

 Safety Accessories

Front seat belt: Removal - Refitting IMPORTANT To avoid any risk of triggering when working on or near a pyrotechnic component (airbags or pretensioners), lock the airbag computer using the diagnosti

SEE MORE:

 Hydraulic unit - master cylinder brake pipe: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Disconnect the battery (see Battery: Removal - Refitting). Fit a pedal press on the brake pedal. K4J or K4M or K9K Remove the battery (see Battery: Removal - Refit

 Rear quarter panel window: Removal - Refitting

C85 or K85 or S85 REMOVAL I - REMOVAL PREPARATION OPERATION C85 or S85 Remove: the rear wing panel trim (see Rear panel lining: Removal - Refitting) (71A, Body internal trim), the rear roof drip moulding trim (see Side roof rail rear trim: Removal - Refitting) (71A, Body internal trim),

© 2016-2025 Copyright Renault Clio Owners Club