Renault Clio: Interior rear-view mirror: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip:
- the upper cover,
- the lower cover.
Note:
When removing the rear view mirror, be careful
not to damage the rain sensor nearby.

- Disconnect the connectors.
- Remove the rear view mirror.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit the rear view mirror.
- Connect the connectors.
- Clip:
- the lower cover,
- the upper cover.
Sun visor: Removal - Refitting

REMOVAL
I - REMOVAL PREPARATION OPERATION

- Unclip the cover (1) in the slit at (2).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Press on the clip (3) using the tool (Car. 1597) at (4)
to unlock the sun visor.

- Tilt the sun visor at (5).
- Remove the sun visor.

- Unclip the cover of the sun visor central support by pressing the tab
(6).
- Remove the sun visor central support using the
(Car. 1597).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Clip:
- the central sun visor support.
- the cover of the sun visor central support,
- the sun visor.
II - FINAL OPERATION
Grab handle: Removal - Refitting

REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the pins (1) without removing them, using the
(Car. 1597).
- Remove the grab handle or the glasses holder.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit the grab handle.
- Clip on the pins (1).
Rear parcel shelf sun visor: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the side trims (1).

- Unclip the rear parcel shelf sun blind (2) and (3).
- Remove the rear parcel shelf sun blind.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Position the rear parcel shelf sun blind.
- Clip the rear parcel shelf blind into place.
- Refit the side trim pieces (1).
II - FINAL OPERATION
- Carry out a function test.
READ NEXT:
IMPORTANT
Before carrying out any work on or near a safety
system component, lock the airbag computer
using the Diagnostic tool. When this function is
activated, all the trigger lines are disabled an
Front seat belt: Removal - Refitting
IMPORTANT
To avoid any risk of triggering when working on or
near a pyrotechnic component (airbags or pretensioners),
lock the airbag computer using the diagnosti
Renault Clio 4 (2014-2019) is equipped with effective sealing and soundproofing measures to ensure a quiet and comfortable cabin environment. The vehicle features well-sealed doors, windows, and body
SEE MORE:
Your vehicle complies with criteria for
recycling and recovering vehicles at the
end of their service life which will come
into force in 2015.
Some parts of your vehicle have therefore
been designed to facilitate future
recycling.
These parts are easy to remove so
that they can be recove
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see 88A, Wiring harness, Wiring: Precautions
for the repair, 88A-5).
WARNING
To prevent damage to the wiring harness when
refitting, observe the original routing.
REMOVAL
I - REMOVAL PR
© 2016-2025 Copyright Renault Clio Owners Club
