Renault Clio: Rear wing light: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Rear Lighting / Rear wing light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART CONCERNED
- Open the luggage compartment.
- Remove the bolts from the rear wing light (1).
- Remove the rear wing light.
- Disconnect the connector from the rear light on the wing.
- Remove the rear light.
- If replacing the rear light, remove the bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the rear light, refit the bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
- Connect the connector for the rear light on the wing.
- Position the rear light on the wing using the centring devices (2).
- Refit the bolts for the rear light on the wing.
- Close the luggage compartment.
K85
REMOVAL
OPERATION FOR REMOVAL OF PART CONCERNED
- Open the luggage compartment.
- Remove the bolts from the rear wing light (1).
- Remove the rear wing light.
- Disconnect the connector from the rear light on the wing.
- Remove the rear light.
- If replacing the rear light, remove the bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the rear light, refit the bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
- Connect the connector for the rear light on the wing.
- Position the rear light on the wing using the centring devices (2).
- Refit the bolts for the rear light on the wing.
- Close the luggage compartment.
READ NEXT:
Rear light bulb: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the rear light on the wing (see 81A, Rear
lighting, Rear wing light: Removal - Refitting, 81A-5).
B85 or C85 or S85, and DOCUMENTATION
PHASE 1
U
3rd brake light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2)
High level brake light bulb: Removal - Refitting
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the tailgate spoiler (see Tailgate spoiler: Removal - Refitting),
the high level brake light (see 81A, Rear lighting,
3rd brake light: Rem
SEE MORE:
Actuator module: Removal - Refitting
K9K, and JA5
(1) Clutch solenoid valve
(2) Gear engagement solenoid
valve
(18) Gear engagement solenoid
valve
(4) Selection solenoid valve
(5) Engagement sensor
(20) Gear selection sensor
(7) Solenoid valve unit pressure
sensor
(8) High pressure filter
REMOVAL
I - REMOVAL PREPARATION OPERATION
IM
Flow actuator: Removal - Refitting
K9K, and 750 or 752 or 766 or 768
IMPORTANT
Before carrying out any work on the injection system,
check using the Diagnostic tool :
that the injector rail is not under pressure,
that the fuel temperature is not too high.
It is essential to respect the safety and cleanliness
advice whenever work
© 2016-2025 Copyright Renault Clio Owners Club
