Renault Clio: Air conditioning: Check

AIR CONDITIONING or CLIMATE CONTROL

Equipment required

Dual-sensor temperature measuring device

Note: When performing RENAULT maintenance, check the air conditioning system at the end of the vehicle's maintenance program so that the engine will be cold.

I - PREPARATION OPERATION FOR THE MEASUREMENT DEVICE

READ NEXT:

 Refrigerant circuit: Check

AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

 Refrigerant circuit: Draining - Filling

AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

 Condenser: Removal - Refitting

AIR CONDITIONING or CLIMATE CONTROL Note: Before removal, use DIALOGYS to check how the condenser is fitted and arranged. There are 2 possibilities: the condenser and cooling radiator cannot be se

SEE MORE:

 Camshaft: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove: the air filter unit (see

 Diesel injection computer: Configuration

K9K, and 750 or 752 or 764 or 766 or 768 To configure the computer, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injection computer: Removal - Refitting K9K REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the battery (see Battery: Removal - Refitting

© 2016-2025 Copyright Renault Clio Owners Club