Renault Clio: Centre console: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Mechanisms And Accessories / Interior Equipment / Centre console: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove the trim (1).

• Unclip the gear lever trim.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove the bolts (2).
• Push the seats forward as far as possible.

• Remove the bolts (3).
• Take out the centre console (4).

III - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • the centre console,
  • the bolts (3) and (2).

IV - FINAL OPERATION.

• Clip on
  • the gear lever trim,
  • the trim (1).

Glovebox: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

SCHOOL VEHICLE

• Remove the driving school electric control unit (see Driving school repeater electrical control unit: Removal - Refitting) (MR 392, 84A, Control - Signals).

• Partially remove seal (1).
• Unclip the side panel (2).
• Disconnect the connector.

• Remove the bolt (3).

• Unclip the trim (4).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove the bolts (5).

• Remove the bolt (6).

• Take out the glovebox.
• Disconnect the connector.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit the glovebox.

• Refit the bolts (7) and (8).

II - FINAL OPERATION.

• Clip the trim piece in place.

• Refit:
  • the bolt (9),
  • the side panel,
  • the seal (10).

SCHOOL VEHICLE

• Refit the driving school electric control unit (see Driving school repeater electrical control unit: Removal - Refitting) (MR 392, 84A, Control - Signals).

READ NEXT: