Renault Clio: Crankshaft position sensor: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Diesel Injection / Crankshaft position sensor: Removal - Refitting

K9K, and 764 or 766 or 768

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Position the vehicle on a two-post lift (see Vehicle: Towing and lifting).
• Disconnect the battery (see Battery: Removal - Refitting).
• Remove the engine undertray.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Disconnect the connector (1) from the engine speed and position sensor.
• Remove the engine speed and position sensor (2).

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit the engine speed and position sensor.
• Connect the engine speed and position sensor connector.

II - FINAL OPERATION

• Refit the engine undertray.
• Connect the battery (see Battery: Removal - Refitting).

K9K, and 750 or 752

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove the air filter unit air inlet pipe.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Disconnect the connector (1) from the engine speed and position sensor.
• Remove:
  • the engine speed and position sensor bolts (2),
  • the engine speed and position sensor.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Refit:
  • the speed and position sensor,
  • the engine speed and position sensor bolts.
• Connect the engine speed and position sensor connector.

II - FINAL OPERATION

• Refit the air filter unit air inlet pipe.

READ NEXT: