Renault Clio: 3rd brake light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove the blanking covers (1).

- Insert a screwdriver in the openings to move the clips (2).

- Apply pressure to the clips (2) to unclip the high level
brake light.
- Partially remove the raised brake light using a flat-blade
screwdriver while protecting the tailgate area
with masking tape.
- Disconnect the connector (3).
- Unclip the window washer jet by moving the clips (4).
- If replacing the high level brake light, remove the
bulb (see 81A, Rear lighting, High level brake
light bulb: Removal - Refitting, 81A-12).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the high level brake light, refit the bulb
(see 81A, Rear lighting, High level brake light
bulb: Removal - Refitting, 81A-12).
- Connect the connector.
- Clip:
- the window washer jet,
- the high level brake light.
- Refit the blanking covers.
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the tailgate spoiler (see Tailgate spoiler:
Removal - Refitting) (56A, Exterior equipment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove:
- the bolts (1) of the high-level brake light on the tailgate,
- The high-level brake light.
- If replacing the high-level brake light, remove the
bulb (see 81A, Rear lighting, High level brake
light bulb: Removal - Refitting, 81A-12).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- If replacing the high-level brake light, refit the bulb
(see 81A, Rear lighting, High level brake light
bulb: Removal - Refitting, 81A-12).
- Refit the high-level brake light on the tailgate.
II - FINAL OPERATION.
- Refit the tailgate spoiler (see Tailgate spoiler: Removal
- Refitting) (56A, Exterior equipment).
READ NEXT:
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the tailgate spoiler (see Tailgate spoiler: Removal - Refitting),
the high level brake light (see 81A, Rear lighting,
3rd brake light: Rem
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
K85, and DOCUMENTATION PHASE 1
Move the rear fog light using the tool (Car. 1363) as a lever at (1).
B85 or C85 or S85, and DOCUMENTATION
PHASE 2
Interior lighting: Function
I - GENERAL INFORMATION
Vehicles may be fitted with the following units for lighting
the interior of the passenger compartment, depending
on the level of equipment:
a cou
SEE MORE:
Your vehicle complies with criteria for
recycling and recovering vehicles at the
end of their service life which will come
into force in 2015.
Some parts of your vehicle have therefore
been designed to facilitate future
recycling.
These parts are easy to remove so
that they can be recove
Remove the wheel trim using hubcap
tool 1 (located in the tool kit) by engaging
the hook in the opening near
valve 2.
To refit it, align it with valve 2. Push the
retaining hooks in fully, starting with
side A near the valve, followed by B
and C, finishing at D opposite the valve.
© 2016-2025 Copyright Renault Clio Owners Club
