Renault Clio: Front left-hand wiring: Connector access

I - LOCATION OF CONNECTORS

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

II - ACCESS TO CONNECTORS

IMPORTANT

Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

WARNING

To prevent damaging the connectors, consult the disconnection procedure (see Connector: Disconnection and reconnection) (Technical Note 6015A, 88A, Wiring).

1 - Access to the R 107 connectors

LEFT-HAND DRIVE

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

RIGHT-HAND DRIVE

Renault Clio. Front left-hand wiring

2 - Access to the R 374 connector

Renault Clio. Front left-hand wiring

3 - Access to the R 67 connector

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

4 - Access to the R 33 connector

Renault Clio. Front left-hand wiring

READ NEXT:

 Front left-hand wiring: Removal - Refitting

LEFT-HAND DRIVE IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

 Engine wiring: Connector access

I - LOCATION OF CONNECTORS R 67 connector (Engine wiring harness/front left-hand wiring connection). Depending on the engine, connection R 67 is composed of three or four connectors. K4J or K4

 Engine wiring: Removal - Refitting

SEE MORE:

 Exhaust gas cooler: Removal - Refitting

K9K, and 764 or 766 or 768 or 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the scuttle panel gr

 Non-side Opening Elements

Bonnet: Removal - Refitting I - REMOVAL BY MEANS OF THE BONNET BOLTS 1 - REMOVAL PREPARATION OPERATION Remove the bonnet soundproofing (see Bonnet soundproofing: Removal - Refitting). Remove the bonnet jet supply pipe (1). 2 - OPERATION FOR REMOVAL OF PART CONCERNED Remove: the bonnet

© 2016-2025 Copyright Renault Clio Owners Club