Renault Clio: K4M

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

K4M, and 862

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Timing belt: Removal - Refitting

Note: Do not drop the crankshaft timing sprocket when removing the timing belt.

REFITTING - PROCEDURE 1

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

1 - Adjusting the timing

WARNING

Be sure to degrease:

This is to avoid timing slippage.

This slippage leads to engine damage.

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

2 - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

3 - Timing belt tension

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

READ NEXT:

 K9K, and 766 or 768

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt so as not to damage the

 K4J

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the scuttle panel grille (see Scuttle pane

 F4R

WARNING Do not run the engine without the accessories belt to avoid damaging the crankshaft accessories pulley. Note: Two different engine support tools can be used to remove the right-hand suspe

SEE MORE:

 Venturi: Removal - Refitting

K9K, and 750 or 752 or 766 or 768 IMPORTANT Before carrying out any work on the injection circuit, check using the Diagnostic tool that the injector rail is not under pressure, that the fuel temperature is not too high. It is essential to respect the safety and cleanliness advice whenever work

 K9K, and 766 or 768

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt so as not to damage the crankshaft accessories pulley. I - PARTS TO BE SYSTEMATICALLY REPLACED the timing belt, the timin

© 2016-2025 Copyright Renault Clio Owners Club