Renault Clio: K4M

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

K4M, and 862

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Timing belt: Removal - Refitting

Note: Do not drop the crankshaft timing sprocket when removing the timing belt.

REFITTING - PROCEDURE 1

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

1 - Adjusting the timing

WARNING

Be sure to degrease:

This is to avoid timing slippage.

This slippage leads to engine damage.

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

2 - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

3 - Timing belt tension

Renault Clio. Timing belt: Removal - Refitting

Renault Clio. Timing belt: Removal - Refitting

READ NEXT:

 K9K, and 766 or 768

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt so as not to damage the

 K4J

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the scuttle panel grille (see Scuttle pane

 F4R

WARNING Do not run the engine without the accessories belt to avoid damaging the crankshaft accessories pulley. Note: Two different engine support tools can be used to remove the right-hand suspe

SEE MORE:

 Expansion chamber: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Remove the engine undertray. Cut the exhaust pipe (see ) and (see 19B, Exhaust, Exhaust: Precautions for the repair, 19B- 19). II - OPERATION

 Rear bench seat: functions

Position for use Raise the headrest as far as possible to use it in the high position. Check that it is correctly locked. Storage position Press button A and lower the headrest completely. When the headrest is set at the lowest position, this is for storage only. It should not be in t

© 2016-2025 Copyright Renault Clio Owners Club