Renault Clio: Rear loading trim: Removal - Refitting
S85
REMOVAL
I - REMOVAL PREPARATION OPERATION

- Remove:
- the rear parcel shelf,
- the centre rear parcel shelf (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the clips (2).
- Remove the rear end panel central trim assembly.

- Unclip the clips (3).
- Remove the emergency spare wheel flap (4).

- Remove:
- the bolts (5),
- the retaining hooks.


- Remove:
- the bolts (7),
- the centre rear parcel shelf supports.


- Gently lift the luggage compartment tray (9).


- Detach the rear side sections (11) of the luggage
compartment.
- Remove the luggage compartment tray through the
tailgate by bending it slightly (this operation requires
two people).

- Remove the soundproofing.

- Remove the luggage compartment tray mounting (12).

- Remove:
- the bolt (13),
- the load stop bracket.


- Remove the load stop floor by unclipping it towards
the rear (15) (this operation requires two people).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit:
- the load stop floor (this operation requires two people),
- the bolts (14),
- the load stop bracket,
- the bolt (13),
- the luggage compartment tray mounting (12),
- the soundproofing,
- the luggage compartment tray (this operation requires
two people),
- the trim (10),
- the bolts (8).
- Attach the rear side sections (11) of the luggage
compartment tray.
- Refit:
- the centre rear parcel shelf supports,
- the bolts (7) and (6),
- the retaining hooks,
- the bolts (5),
- the emergency spare wheel flap (4).
- Attach the clips (3).
- Refit the rear end panel central trim assembly.
- Attach the clips (2).
II - FINAL OPERATION.
- Refit:
- the centre rear parcel shelf, (1)
- the rear parcel shelf.
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the front speaker (see Front speakers:
Removal - Refitting) (MR 392, 86A, Radio).
Unclip the door mirror trim piece (1).
II - OPERATION FOR REM
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Special features of vehicles fitted with manual
window winders
Unclip the winder handle (1) using a pair of unclipping
pliers (protect the door
SEE MORE:
I - SPECIAL NOTES
Its role is to modify the valve timing.
To improve cylinder filling at all engine speeds, the engine is fitted with an
inlet camshaft dephaser (1).
Dephasing at the moment when the inlet valves close
optimises filling according to engine speed. Torque at
midrange engine speed an
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the front side door trim (see Front side
door trim: Removal - Refitting) (72A, Side opening
elements trim).
Open the access flaps (1) and (2) of the window
winder mechanism following the marking on the
door sealing film (see Door sealing fi
© 2016-2025 Copyright Renault Clio Owners Club
