Renault Clio: Parking brake cables: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

DRUM BRAKE

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Parking brake cables: Removal - Refitting

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

Renault Clio. Parking brake cables: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

 

II - FINAL OPERATION.

DRUM BRAKE

 

READ NEXT:

 Brake servo: Check

RIGHT-HAND DRIVE There is no "RENAULT" tool to check the braking assistance circuit. Use a vacuum pump fitted with couplings, part numbers 7701349942 and 7700105874 with hose part number 8200027352

 Anti-lock Braking System

 Hydraulic unit without ESP: Removal - Refitting

LEFT-HAND DRIVE WARNING Prepare for the flow of fluid, and protect the surrounding components. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towin

SEE MORE:

 Multifunction switch: Removal - Refitting

DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Shift the selector lever to Neutral. Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the battery tray (see ) (MR 392, 80A, Battery), the air filter unit (see Air filter unit: Removal - Refitting) (MR 3

 Front wing lower mounting support: General description

WARNING The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading the following general information, make sure that there are no special notes associated with the vehicle. These special notes are specified

© 2016-2025 Copyright Renault Clio Owners Club