Renault Clio: Air conditioning: Check

AIR CONDITIONING or CLIMATE CONTROL

Equipment required

Dual-sensor temperature measuring device

Note: When performing RENAULT maintenance, check the air conditioning system at the end of the vehicle's maintenance program so that the engine will be cold.

I - PREPARATION OPERATION FOR THE MEASUREMENT DEVICE

READ NEXT:

 Refrigerant circuit: Check

AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

 Refrigerant circuit: Draining - Filling

AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

 Condenser: Removal - Refitting

AIR CONDITIONING or CLIMATE CONTROL Note: Before removal, use DIALOGYS to check how the condenser is fitted and arranged. There are 2 possibilities: the condenser and cooling radiator cannot be se

SEE MORE:

 Manual gear control: Adjustment

TL4 ADJUSTMENT ADJUSTMENT OF SELECTION CABLE DURING A REMOVAL OPERATION 1 - Passenger compartment Shift the selector lever to third gear. Fit a shim (1) (6 mm between the locking ring and reverse gear interlock on the selector lever. Use a strap (2) to immobilise the lever against the shim

 K9K, and 766 or 768

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt so as not to damage the crankshaft accessories pulley. I - PARTS TO BE SYSTEMATICALLY REPLACED the timing belt, the timin

© 2016-2025 Copyright Renault Clio Owners Club