Renault Clio: D4F, and JA3

Renault Clio. Engine - gearbox assembly: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

AIR CONDITIONING

 

Renault Clio. Engine - gearbox assembly: Removal - Refitting

AIR CONDITIONING

Renault Clio. Engine - gearbox assembly: Removal - Refitting

WARNING

Plugs must be fitted on the hoses to prevent moisture from entering the system.

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

IMPORTANT

During this operation, be sure to:

Renault Clio. Engine - gearbox assembly: Removal - Refitting

Renault Clio. Engine - gearbox assembly: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Engine - gearbox assembly: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

II - REFITTING OPERATION FOR PART CONCERNED

III - FINAL OPERATION.

AIR CONDITIONING

 

AIR CONDITIONING

READ NEXT:

 D4F, and 784 or 786

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the engine cover, the engine unde

 K9K, and JH3 or JR5 or TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove the front engine cover. K9K, and 772 Discha

 Valves: Adjustment

D4F I - VALVE CLEARANCE ADJUSTMENT PREPARATION OPERATION Fit the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove: the front right-hand wheel (see Wheel: Removal - Refitting)

SEE MORE:

 Brake circuit: Operating diagram

" X " braking system with load-sensitive compensator IMPORTANT This is a diagram of the general principle, do not use it as a reference for take-off points or circuit allocation. When replacing components in a vehicle's braking circuit, always mark the pipes before removing them. " X " braking syst

 Charge circuit: Specifications

D4F or F4R or K4J or K4M or K9K or M4R ALTERNATOR SPECIFICATIONS Charge circuit: Function D4F or F4R or K4J or K4M or K9K or M4R OPERATION These vehicles are fitted with a built-in regulator and an instrument panel warning light which operates as follows: when the ignition is switched on, the war

© 2016-2025 Copyright Renault Clio Owners Club