Renault Clio: High level brake light bulb: Removal - Refitting
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the tailgate spoiler (see Tailgate spoiler: Removal - Refitting),
- the high level brake light (see 81A, Rear lighting,
3rd brake light: Removal - Refitting, 81A- 10).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove:
- the bulb holder by pressing on the clips (1),
- the bulbs.
Note:
When replacing bulbs, use approved W5W bulbs.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Clip:
- the bulbs into the bulb holder,
- the bulb holder onto the high-level brake light.
II - FINAL OPERATION.
- Refit:
- the high level brake light (see 81A, Rear lighting,
3rd brake light: Removal - Refitting, 81A- 10),
- the tailgate spoiler (see Tailgate spoiler: Removal - Refitting).
B85 or C85 or S85
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the high level brake light (see 81A, Rear
lighting, 3rd brake light: Removal - Refitting, 81A-10).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove the bulb (1) from the bulb holder.
Note:
When replacing the bulb, use an approved
W16W bulb.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the bulb in the bulb holder.
II - FINAL OPERATION.
- Refit the high level brake light (see 81A, Rear lighting,
3rd brake light: Removal - Refitting, 81A-10).
READ NEXT:
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
K85, and DOCUMENTATION PHASE 1
Move the rear fog light using the tool (Car. 1363) as a lever at (1).
B85 or C85 or S85, and DOCUMENTATION
PHASE 2
Interior lighting: Function
I - GENERAL INFORMATION
Vehicles may be fitted with the following units for lighting
the interior of the passenger compartment, depending
on the level of equipment:
a cou
Fuses: List and location of components
Passenger compartment fuse and
relay box
Consumer cut-out fuse
Additional relay/fuse box
Battery protection fuses
Protection and switching unit
Power sup
SEE MORE:
K9K, and 764 or 772
WARNING
Before starting work on the vehicle, have to hand:
a new blanking plug kit (part no. 77 01 476 857),
cleaning wipes (part no. 77 11 211 707),
cleaning product (part no. 77 11 224 188).
WARNING
Parts always to be replaced:
all the high pressure pipes which have bee
D4F, and 740 or 742 or 764
WARNING
Do not use any product designed to improve the
electrical contact in the injection computer and oxygen
sensor connectors or on the bodies of the oxygen
sensors. Failure to respect this advice prevents
the oxygen sensor from operating correctly and
results in failu
© 2016-2025 Copyright Renault Clio Owners Club
