Renault Clio: Pre-postheating unit: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Preheating / Pre-postheating unit: Removal - Refitting

K9K

Renault Clio. Pre-postheating unit: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Remove:
- the battery (see Battery: Removal - Refitting),
- the battery tray (see Battery tray: Removal - Refitting) (MR 392, 80A, Battery).

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Pre-postheating unit: Removal - Refitting

Remove the pre-postheating unit mounting bolt (8).

Renault Clio. Pre-postheating unit: Removal - Refitting

Disconnect the pre-postheating unit connector (9).
Remove the pre-postheating unit.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Connect the pre-postheating unit connector.
Refit the pre-postheating unit.
Tighten to torque the pre-postheating unit mounting nut (9 Nm).

II - FINAL OPERATION.

Refit the battery (see Battery: Removal - Refitting)

SEE MORE:

Front brake calliper: Repair

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see Front axle components: Precautions for the repair). WARNING Prepare for the flow of fluid, and protect the surrounding components. REPAIR I - REPAIR PREPARATION OPERATION Positi

Rear pyrotechnic inertia reel: Removal - Refitting

B85 or C85 or K85 IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88C, Air bag and Pretensioners, Airbag and pretensioners: Precautions for the repair, 88C-6). REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT It is essential t

Renault Clio: Pre-postheating unit: Removal - Refitting

READ NEXT:

Heater plugs: Removal - Refitting

Antipollution

Exhaust gas recirculation: List and location of components

SEE MORE:

Front brake calliper: Repair

Rear pyrotechnic inertia reel: Removal - Refitting