Renault Clio: Rear parcel shelf

Removal

Renault Clio. Removal


Renault Clio. Removal


To refit, proceed in the reverse order to removal.

Maximum weight on rear parcel shelf: 25 kg, evenly distributed.

Utility version

Renault Clio. Utility version


Unclip mountings 3 on either side of the parcel shelf, then remove it via the boot.

To refit it, proceed in the reverse order to removal.

Do not place any objects, especially heavy or solid objects on the luggage compartment cover. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.

READ NEXT:

 Luggage compartment cover: estate version

To remove the flexible section of the luggage compartment cover 1 Pull handle 2 gently to release the pins from their mounting points located on each side of the luggage boot. Guide the lugg

 Boot storage

Mobile floor When fitted to the vehicle, it can be used to make loading easier. Note: if you need to access the ISOFIX ring and/or the net ring at the bottom of the boot, open flap 3.

 Transporting objects in the boot

Always position the objects transported so that the largest surface is against: The rear bench seatback for normal loads (example A). The front seatbacks with the rear seatbacks

SEE MORE:

 Inlet distributor: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting). Remove the air filter unit (see 12A, Fuel mixture, Air filter unit: Removal - Refitting, 12A-17). Remove: the oil filler neck mounting bolt (1), the oil filler

 Brake servo: Check

RIGHT-HAND DRIVE There is no "RENAULT" tool to check the braking assistance circuit. Use a vacuum pump fitted with couplings, part numbers 7701349942 and 7700105874 with hose part number 8200027352 or 8200376245. CHECK I - CHECKING THE SEALS When checking the brake servo seal, ensure that there

© 2016-2025 Copyright Renault Clio Owners Club