Renault Clio: Wheel speed sensor: Removal - Refitting

EQUIPMENT LEVEL EAC or EQUIPMENT LEVEL SPORT

Renault Clio. Wheel speed sensor: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Wheel speed sensor: Removal - Refitting

Renault Clio. Wheel speed sensor: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

II - FINAL OPERATION.

READ NEXT:

 Lateral acceleration and yaw sensor: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the centre console (see Centre console: Removal - Refitting) (M

 Braking computer: Removal - Refitting

Note: Removal of the ESP or ABS computer is allowed. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equip

 Air Conditioning

The Renault Clio IV (2014-2019) is equipped with an air conditioning system designed to keep the cabin cool and comfortable. The air conditioning system allows you to adjust the temperature to your de

SEE MORE:

 Electronic stability program (ESC) with understeer control and traction control

Electronic stability control ESC This system helps you to keep control of the vehicle in critical driving conditions (avoiding an obstacle, loss of grip on a bend, etc.). Operating principle A sensor in the steering wheel detects the direction selected by the driver. Other sensors througho

 Rear Seat Trim

1/3 and 2/3 rear bench seat base trim: Removal - Refitting REMOVAL I - REMOVAL PREPARATION OPERATION Lift up the rear bench seat base. Remove the rear bench seat base at (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Unclip the retaining strips (2). Remove the seat trim and foam.

© 2016-2025 Copyright Renault Clio Owners Club