Renault Clio: Front door sill lining: Removal - Refitting
B85 or C85
REMOVAL
I - REMOVAL PREPARATION OPERATION

- Partially remove the seal (1).

- Using a pair of unclipping pliers, unclip the bonnet release catch (2).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the trim at (3) and (4).
- Remove the trim (5).
C85

- Unclip the trim at (6) and (7).
- Remove the front door sill linings.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the front door sill trim.
II - FINAL OPERATION.
- Refit the bonnet release handle.

Rear door sill lining: Removal - Refitting
B85
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the complete rear bench seat.
- Partially unclip the front door sill trim (see 71A,
Body internal trim, Front door sill lining: Removal
- Refitting, 71A-10).
- Remove the rear door sill upper trim (see 71A, Body
internal trim, Rear inner sill upper trim: Removal
- Refitting, 71A-24).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove clip (1) using the unclipping pliers.
- Unclip the trim at (2) and at (3).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the door sill trim.
- Refit the mounting clip.
II - FINAL OPERATION
- Refit:
- the rear door sill upper trim (see 71A, Body internal
trim, Rear inner sill upper trim: Removal -
Refitting, 71A-24).
- the front door sill trims (see 71A, Body internal
trim, Front door sill lining: Removal - Refitting, 71A-10),
- the complete rear bench seat.
READ NEXT:
B85 or C85
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags an
REMOVAL
I - REMOVAL PREPARATION OPERATION
Partially remove the seal (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Unclip the top of the pillar trim at (2).
remove the pillar trim by pul
C85
REMOVAL
REMOVAL PREPARATION OPERATION
Remove:
the complete rear bench seat,
the rear wing panel lining (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
SEE MORE:
PANORAMIC SUNROOF
IMPORTANT
Before working on or near a safety system component;
make sure that the airbag computer is
locked using the Diagnostic tool. When this
function is activated, all the triggering lines are
inhibited and the airbag warning light on the
instrument panel is continuously lit (
Using a dial gauge connected to the drum, check that
the end float is greater than 0.03 mm.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle: Towing and
lifting).
Remove:
the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, 35
© 2016-2025 Copyright Renault Clio Owners Club
