Renault Clio: Parking brake cables: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

DRUM BRAKE

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Parking brake cables: Removal - Refitting

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

Renault Clio. Parking brake cables: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

 

II - FINAL OPERATION.

DRUM BRAKE

 

READ NEXT:

 Brake servo: Check

RIGHT-HAND DRIVE There is no "RENAULT" tool to check the braking assistance circuit. Use a vacuum pump fitted with couplings, part numbers 7701349942 and 7700105874 with hose part number 8200027352

 Anti-lock Braking System

 Hydraulic unit without ESP: Removal - Refitting

LEFT-HAND DRIVE WARNING Prepare for the flow of fluid, and protect the surrounding components. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towin

SEE MORE:

 High pressure pump leak flow: Check

K9K, and 764 or 772 Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Disconnect the inlet pressure sensor (1). Remove: the air duct (2) between the air filter and the intercooler, the air duct (3) between the intercooler and the turbocharger. Un

 Front brake calliper: Removal - Refitting

EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG Note: The callipers supplied as replacement parts are pre-filled. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on

© 2016-2025 Copyright Renault Clio Owners Club