Renault Clio: Front side door electric window mechanism: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Mechanisms And Accessories / Side Opening Element Mechanisms / Front side door electric window mechanism: Removal - Refitting

Renault Clio. Front side door electric window mechanism: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Front side door electric window mechanism: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Front side door electric window mechanism: Removal - Refitting

C85

Renault Clio. Front side door electric window mechanism: Removal - Refitting

 

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Note: Check for the presence of washers on the bolts (6), the bolts (7) and the bolts (8) when refitting the window winder mechanism.

The presence of washers ensures correct tightening.

Renault Clio. Front side door electric window mechanism: Removal - Refitting

Note: When refitting the window winder mechanism, respect the tightening order.

The tightening order ensures the correct alignment of the window winder mechanism and that the window is correctly positioned with the clip.

C85

 

II - FINAL OPERATION

Front side door manual window winder mechanism: Removal - Refitting

Renault Clio. Front side door manual window winder mechanism: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Front side door manual window winder mechanism: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Front side door manual window winder mechanism: Removal - Refitting

C85

Renault Clio. Front side door manual window winder mechanism: Removal - Refitting

 

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Note: Check for the presence of washers on the bolts (1), the bolts (2) and the bolts (3) when refitting the window winder mechanism.

The presence of washers ensures correct tightening.

Renault Clio. Front side door manual window winder mechanism: Removal - Refitting

Note: When refitting the window winder mechanism, respect the tightening order.

The tightening order ensures the correct alignment of the window winder mechanism and that the window is correctly positioned with the clip.

C85

 

II - FINAL OPERATION

READ NEXT:

 Rear side door lock: Removal - Refitting

B85 or K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the door trim (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening element trim). Unclip the access blanking cove

 Non-side Opening Element Mechanisms

Bonnet release control: Removal - Refitting REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the wheel arch liners (see 55A, Exterior protection, Front wheel arch liner: Removal - Refitting, 5

 Bonnet lock: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front bumper (see 55A, Exterior protection, Front bumper: Removal - Refitting, 55A-1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove

SEE MORE:

 Radiator cross member mounting: General description

WARNING The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading the following general information, make sure that there are no special notes associated with the vehicle. These special notes are specified

 Rigid brake pipe: Repair

This procedure applies to copper pipes diameter 4.7 mm. Note: This procedure does not apply to: hybrid pipes (pipe + hose), pipes with diameters 6 mm and 8 mm. REPAIR I - PIPE PREPARATION OPERATION WARNING To avoid causing a breakdown in hydraulic brake circuit, do not squash or bend the rigid

© 2016-2025 Copyright Renault Clio Owners Club