Renault Clio: Rear parcel shelf side trim: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
C85
- Remove the rear wing panel trim (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Unclip the rear inner sill upper trim (see 71A, Body
internal trim, Rear inner sill upper trim: Removal
- Refitting, 71A-24).
B85 or C85
- Remove the rear quarter panel trim (see 71A, Body
internal trim, Quarter panel trim: Removal - Refitting, 71A-27).
K85

- Partially remove the seals from the rear side door
and the tailgate.
- Unclip the rear inner sill upper trim at (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
B85 or C85

- Using a flat-blade screwdriver, unclip (2) the rear
parcel shelf side trim.
K85


- Unclip the rear parcel shelf side trim.
- Disconnect the luggage compartment light connector.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
B85 or C85
- Clip the rear parcel shelf side trim onto the rear quarter
panel trim.
K85
- Clip on the rear parcel shelf side trim.
- Refit the bolt (3).
II - FINAL OPERATION.
B85 or C85
- Refit the rear quarter panel trim (see 71A, Body internal
trim, Quarter panel trim: Removal - Refitting, 71A-27).
C85
- Clip on the rear wing panel trim (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear inner sill upper trim (see 71A, Body internal
trim, Rear inner sill upper trim: Removal -
Refitting, 71A-24).
K85
- Connect the luggage compartment light connector.
- Clip on the rear inner sill upper trim.
- Refit the seals on the rear side door and the tailgate.
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
B85 or C85 or S85
Remove the luggage compartment carpet.
K85
Remove the luggage compartment raised floor (1).
Remove the luggage compartment carpe
S85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the rear parcel shelf,
the centre rear parcel shelf (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Unclip the clips (2).
Remove
SEE MORE:
Reversing lights and rear fog
lights 12
Open the boot lid.
Unclip cover 13 and remove it.
Turn bulb holder 14 fully anticlockwise
and change the bulb.
To reassemble, proceed in the reverse
order to removal.
When the bulb has been changed,
make sure you refit the cover 13 cor
K4M, and DP0
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the gearbox (see Automatic gearbox: Removal - Refitting).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Set up the (Mot. 582-01) (2).
Remove:
the bolts (2),
the drive plate,
tool (Mot. 582-01).
REFITTING
I - REFITTING PR
© 2016-2025 Copyright Renault Clio Owners Club
