{MAINCONT}

Renault Clio: Pre-postheating unit: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Preheating / Pre-postheating unit: Removal - Refitting

K9K

Renault Clio. Pre-postheating unit: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Remove:
- the battery (see Battery: Removal - Refitting),
- the battery tray (see Battery tray: Removal - Refitting) (MR 392, 80A, Battery).

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Pre-postheating unit: Removal - Refitting

Remove the pre-postheating unit mounting bolt (8).

Renault Clio. Pre-postheating unit: Removal - Refitting

Disconnect the pre-postheating unit connector (9).
Remove the pre-postheating unit.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Connect the pre-postheating unit connector.
Refit the pre-postheating unit.
Tighten to torque the pre-postheating unit mounting nut (9 Nm).

II - FINAL OPERATION.

Refit the battery (see Battery: Removal - Refitting)

SEE MORE:

Petrol injection computer: Removal - Refitting

D4F, and 740 or 742 or 764 WARNING Do not use any product designed to improve the electrical contact in the injection computer and oxygen sensor connectors or on the bodies of the oxygen sensors. Failure to respect this advice prevents the oxygen sensor from operating correctly and results in failu

Engine cooling: Parts and consumables for the repair

INGREDIENT Coolant GLACEOL RX (TYPE D) Note: Ready-to-use coolant or antifreeze must be diluted with distilled water in accordance with the guidelines marked on the container. Engine cooling: Precautions for the repair IMPORTANT The circuits are designed to be pressurized, so be careful at high temp

{VIDEOCONT}

Renault Clio: Pre-postheating unit: Removal - Refitting

READ NEXT:

Heater plugs: Removal - Refitting

Antipollution

Exhaust gas recirculation: List and location of components

SEE MORE:

Petrol injection computer: Removal - Refitting

Engine cooling: Parts and consumables for the repair