Renault Clio: Interior rear-view mirror: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip:
- the upper cover,
- the lower cover.
Note:
When removing the rear view mirror, be careful
not to damage the rain sensor nearby.

- Disconnect the connectors.
- Remove the rear view mirror.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit the rear view mirror.
- Connect the connectors.
- Clip:
- the lower cover,
- the upper cover.
Sun visor: Removal - Refitting

REMOVAL
I - REMOVAL PREPARATION OPERATION

- Unclip the cover (1) in the slit at (2).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Press on the clip (3) using the tool (Car. 1597) at (4)
to unlock the sun visor.

- Tilt the sun visor at (5).
- Remove the sun visor.

- Unclip the cover of the sun visor central support by pressing the tab
(6).
- Remove the sun visor central support using the
(Car. 1597).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Clip:
- the central sun visor support.
- the cover of the sun visor central support,
- the sun visor.
II - FINAL OPERATION
Grab handle: Removal - Refitting

REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the pins (1) without removing them, using the
(Car. 1597).
- Remove the grab handle or the glasses holder.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit the grab handle.
- Clip on the pins (1).
Rear parcel shelf sun visor: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the side trims (1).

- Unclip the rear parcel shelf sun blind (2) and (3).
- Remove the rear parcel shelf sun blind.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Position the rear parcel shelf sun blind.
- Clip the rear parcel shelf blind into place.
- Refit the side trim pieces (1).
II - FINAL OPERATION
- Carry out a function test.
READ NEXT:
IMPORTANT
Before carrying out any work on or near a safety
system component, lock the airbag computer
using the Diagnostic tool. When this function is
activated, all the trigger lines are disabled an
Front seat belt: Removal - Refitting
IMPORTANT
To avoid any risk of triggering when working on or
near a pyrotechnic component (airbags or pretensioners),
lock the airbag computer using the diagnosti
Renault Clio 4 (2014-2019) is equipped with effective sealing and soundproofing measures to ensure a quiet and comfortable cabin environment. The vehicle features well-sealed doors, windows, and body
SEE MORE:
K9K, and 764 or 772
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the air filter box inlet air pipe (1).
Remove the turbocharger outlet air pipe retaining pins (2).
Remove:
the turbocharger outlet air pipe bolt (3),
the turbocharger outlet air pipe
Undo the clip (4) from the int
K9K
K9K, and 764 or 766 or 768 or 772
First fitting of the exhaust gas cooler recirculation
assembly
(1) Exhaust gas recirculation solenoid
valve
(2) Exhaust gas cooler
(3) Exhaust gas inlet pipe
(4) Metal air inlet tube
(5) Cooler support on the flywheel
end
(6) Cooler support on the timing
side
S
© 2016-2026 Copyright Renault Clio Owners Club - 0.0034
