Renault Clio: Rear light bulb: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

B85 or C85 or S85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

K85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

B85 or C85 or S85, and DOCUMENTATION PHASE 2

Renault Clio. Rear light bulb: Removal - Refitting

 

II - OPERATION FOR REMOVAL OF PART CONCERNED

B85 or C85 or S85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Reversing light bulb
  3. Direction indicator bulb
  4. Rear fog light bulb

Note: The layout of bulbs is the same for both rear lights.

K85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Direction indicator bulb
  3. Reversing light bulb

Note: The layout of bulbs is the same for both rear lights.

B85 or C85 or S85, and DOCUMENTATION PHASE 2

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Reversing light bulb
  3. Direction indicator bulb

Note: The layout of bulbs is the same for both rear lights.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Note: When replacing a bulb, only use approved bulbs.

II - FINAL OPERATION

READ NEXT:

 3rd brake light: Removal - Refitting

B85 or C85 or S85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the blanking covers (1). Insert a screwdriver in the openings to move the clips (2). Apply pressure to the clips (2)

 High level brake light bulb: Removal - Refitting

K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the tailgate spoiler (see Tailgate spoiler: Removal - Refitting), the high level brake light (see 81A, Rear lighting, 3rd brake light: Rem

 Rear fog lights: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED K85, and DOCUMENTATION PHASE 1 Move the rear fog light using the tool (Car. 1363) as a lever at (1). B85 or C85 or S85, and DOCUMENTATION PHASE 2

SEE MORE:

 Sequential gearbox: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, run command " Discharge pressure accumulator " AC081. To confirm the pressure drop, read the " Hydr

 Pump - sender - filter: Removal - Refitting

D4F or F4R or K4J or K4M or M4R IMPORTANT During this operation, be sure to: be careful of fuel splashes when disconnecting the union. IMPORTANT Wear goggles with side protectors for this operation. IMPORTANT Wear latex gloves during the operation. WARNING To prevent impurities from entering th

© 2016-2025 Copyright Renault Clio Owners Club