Renault Clio: Vehicle identification plate
The information shown on the vehicle identification plate should be quoted on all correspondence or orders.
The presence and location of the information depends on the vehicle.
Vehicle identification plate A
- Manufacturer name.
- EC design number or approval number.
- Identification number.
Depending on the vehicle, this information is also given on marking B.
- MAM (Maximum Authorised Mass).
- GTW (Gross train weight: vehicle fully loaded, with trailer).
- MPAW (Maximim Permissible Weight) for front axle.
- MPAW on rear axle.
- Reserved for related or additional entries.
- Diesel exhaust emissions.
- Paint reference (colour code).
READ NEXT:
Engine identification plate
Please quote the information on the
engine plate or label A in all correspondence
or orders.
(Location varies depending on engine)
Engine type.
Engine suffix.
Engine number.
Dimensions
Five-door version
Estate version
Engine specifications
Weights
The weights indicated for a basic vehicle without options: they vary
depending on the your vehicle’s equipment. Consult
your approved Dealer.
* Towing weight (towing a caravan, boat, etc.)
SEE MORE:
Rear parcel shelf
Removal
Lower the rear headrests;
unhook the two cords 1 from the boot
door;
lift the parcel shelf 2 to half height in
order to unclip it (movement A);
push the shelf in (B movement) and
turn it;
pull the shelf towards you.
To refit, proceed in the reverse order to
Drive plate: Removal - Refitting
K4M, and DP0
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the gearbox (see 23A, Automatic gearbox,
Automatic gearbox: Removal - Refitting, 23A-7).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Set up the (Mot. 582-01) (2).
Remove:
the bolts (2),
the drive plate,
tool (Mot. 582-01).
© 2016-2025 Copyright Renault Clio Owners Club
