Renault Clio: Suspended engine mounting: Tightening torque

D4F

Renault Clio. Suspended engine mounting: Tightening torque

Tightening torque (in Nm)

K4J, and JH3

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

K4M, and JH3

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

K4M, and DP0

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

K9K, and JR5

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

K9K, and JH3

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

K9K, and TL4

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

D4F, and JH3

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

M4R, and DP0

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

F4R

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

M4R, and TL4

Renault Clio. Suspended engine mounting: Tightening torque

Renault Clio. Suspended engine mounting: Tightening torque

READ NEXT:

 Lower engine tie-bar: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Disconnect the battery (see Battery: Remov

 Right-hand suspended engine mounting: Removal - Refitting

D4F or K9K, and JH3 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see ) (MR 392, 80A, Battery). Remove: the scuttle panel grille (see Scuttle panel grille: Removal - Refitt

 Left-hand suspended engine mounting: Removal - Refitting

K4M, and DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the scuttle panel grille (see Scuttle panel grille: Removal - Refitting) (MR 393, 56A, Exterior equipment), the scoop under th

SEE MORE:

 Choosing a child seat mounting

Rear-facing child seats A baby’s head is, proportionally, heavier than that of an adult and its neck is very fragile. Transport the child in this position for as long as possible (until the age of 2 at the very least). It supports both the head and the neck. Choose a bucket type seat

 Pump - sender - filter: Removal - Refitting

D4F or F4R or K4J or K4M or M4R IMPORTANT During this operation, be sure to: be careful of fuel splashes when disconnecting the union. IMPORTANT Wear goggles with side protectors for this operation. IMPORTANT Wear latex gloves during the operation. WARNING To prevent impurities from entering th

© 2016-2025 Copyright Renault Clio Owners Club