Renault Clio: Rear light bulb: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the rear light on the wing (see 81A, Rear
lighting, Rear wing light: Removal - Refitting, 81A-5).
B85 or C85 or S85, and DOCUMENTATION
PHASE 1

- Unclip the bulb holder plate (1) by pressing clips (2) and (3).
K85, and DOCUMENTATION PHASE 1

- Unclip the bulb holder plate by pressing clips (4) and (5).
B85 or C85 or S85, and DOCUMENTATION
PHASE 2

- Unclip the bulb holder plate by pressing on the clips (6).
- Remove the bulb holder plate.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
B85 or C85 or S85, and DOCUMENTATION
PHASE 1

- Brake light and side light bulb
- Reversing light bulb
- Direction indicator bulb
- Rear fog light bulb
- Remove the bulbs from the bulb holders.
Note:
The layout of bulbs is the same for both rear
lights.
K85, and DOCUMENTATION PHASE 1

- Brake light and side light bulb
- Direction indicator bulb
- Reversing light bulb
- Remove the bulbs from the bulb holders.
Note:
The layout of bulbs is the same for both rear
lights.
B85 or C85 or S85, and DOCUMENTATION PHASE 2

- Brake light and side light bulb
- Reversing light bulb
- Direction indicator bulb
- Remove the bulbs from the bulb holders.
Note:
The layout of bulbs is the same for both rear
lights.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
Note:
When replacing a bulb, only use approved bulbs.
- Refit the bulbs on the bulb holder plate.
II - FINAL OPERATION
- Clip the bulb holder plate onto the rear light.
- Refit the rear light on the wing.
READ NEXT:
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2)
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the tailgate spoiler (see Tailgate spoiler: Removal - Refitting),
the high level brake light (see 81A, Rear lighting,
3rd brake light: Rem
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
K85, and DOCUMENTATION PHASE 1
Move the rear fog light using the tool (Car. 1363) as a lever at (1).
B85 or C85 or S85, and DOCUMENTATION
PHASE 2
SEE MORE:
REMOVAL
I - REMOVAL PREPARATION OPERATION
Lock the airbag computer using the Diagnostic tool
to unlock the steering column lock (see Fault finding
- Replacement of components) (MR 394, 88C,
Airbags and seat belt pretensioners).
Unclip trim (1).
Unclip:
the plasti-rivet (2),
the bol
I - PREREQUISITES FOR WHEEL BALANCING
Wheel balancing is a measurement operation.
Several conditions must be met to achieve a reliable
result in a single operation.
The wheel balancer must be installed in accordance
with the manufacturer's instructions.
It is essential to calibrate the bala
© 2016-2025 Copyright Renault Clio Owners Club
