Renault Clio manuals

Renault Clio: Exhaust: List and location of components

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Exhaust / Exhaust: List and location of components

PIPE ASSEMBLY

D4F, and 740 or 742 or 764

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the catalytic converter and the expansion chamber
(ZC2) cutting area between the expansion chamber and the silencer

D4F, and 784 or 786

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the expansion chamber and the silencer

K4J

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the catalytic converter and the expansion chamber
(ZC2) cutting area between the expansion chamber and the silencer

K4M

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the catalytic converter and the expansion chamber
(ZC2) cutting area between the expansion chamber and the silencer

M4R

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the catalytic converter and the expansion chamber
(ZC2) cutting area between the expansion chamber and the silencer

F4R

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the catalytic converter integrated into the exhaust pipe and the expansion chamber
(ZC2) cutting area between the expansion chamber and the silencer

K9K, and 764

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the expansion chamber inlet pipe and the expansion chamber
(ZC2) cutting area between the expansion chamber and the silencer

K9K, and 750 or 752 or 760 or 762 or 766 or 768

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the intermediate pipe inlet pipe and the intermediate pipe
(ZC2) cutting area between the intermediate pipe and the silencer

K9K, and 772

Renault Clio. Exhaust: List and location of components

(ZC1) cutting area between the particle filter and the intermediate pipe
(ZC2) cutting area between the intermediate pipe and the silencer

READ NEXT:

 Exhaust: Precautions for the repair

I - PARTS AND CONSUMABLES FOR THE REPAIR 1 - Parts always to be replaced: the exhaust trunking (if fitted) the seal or sealing ring on the connection between the catalytic converter or catalytic

 Catalytic pre-converter: Removal - Refitting

K9K, and 772 PARTS AND CONSUMABLES FOR THE REPAIR WORK Parts always to be replaced: the seal between the catalytic pre-converter and the turbocharger, the seal between the catalytic pre-conve

 Catalytic converter: Removal - Refitting

K4J or K4M IMPORTANT Catalytic converters contain ceramic fibres: these are contained within a closed unit, and cannot disperse. Cutting or drilling catalytic converters is prohibited. REMOVAL I - R

SEE MORE:

 Petrol injection: List and location of components

D4F, and 740 or 742 or 764 Petrol vapour rebreathing solenoid valve Air inlet pressure sensor Motorised throttle valve Injection computer (5) Fuel injection computer (6) Motorised throttle valve (7) Fuel vapour recirculation solenoid valve (8) Ignition coil (9) Upstream oxygen sensor (1

 Rear fog lights: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED K85, and DOCUMENTATION PHASE 1 Move the rear fog light using the tool (Car. 1363) as a lever at (1). B85 or C85 or S85, and DOCUMENTATION PHASE 2 Move the rear fog light using the tool (Car. 1363) as a lever at (2).   Disconnect the rea

© 2016-2025 Copyright Renault Clio Owners Club