Renault Clio: Rear parcel shelf

Removal

Renault Clio. Removal


Renault Clio. Removal


To refit, proceed in the reverse order to removal.

Maximum weight on rear parcel shelf: 25 kg, evenly distributed.

Utility version

Renault Clio. Utility version


Unclip mountings 3 on either side of the parcel shelf, then remove it via the boot.

To refit it, proceed in the reverse order to removal.

Do not place any objects, especially heavy or solid objects on the luggage compartment cover. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.

READ NEXT:

 Luggage compartment cover: estate version

To remove the flexible section of the luggage compartment cover 1 Pull handle 2 gently to release the pins from their mounting points located on each side of the luggage boot. Guide the lugg

 Boot storage

Mobile floor When fitted to the vehicle, it can be used to make loading easier. Note: if you need to access the ISOFIX ring and/or the net ring at the bottom of the boot, open flap 3.

 Transporting objects in the boot

Always position the objects transported so that the largest surface is against: The rear bench seatback for normal loads (example A). The front seatbacks with the rear seatbacks

SEE MORE:

 K9K, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove: the engine cover, the engine undertray, the scu

 K9K, and 764 or 772

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt, to avoid breaking the crankshaft accessories pulley. PARTS AND CONSUMABLES FOR THE REPAIR WORK Parts always to be replace

© 2016-2025 Copyright Renault Clio Owners Club