Renault Clio: Display A

Renault Clio. Display A


To access display 1 for setting the time, press button 2 or 3. Wait for a few seconds.

The hours and minutes flash and you are now in setting mode; press and hold button 2 or 3 to set the hours.

Once the minutes flash, repeatedly press or press and hold button 2 ou 3 to set the time.

Renault Clio. Display A


Then press and hold button 2 or 3 to confirm the time set.

The minute display flashes: repeatedly press or press and hold button 2 or 3 to set the time.

When setting is complete, the hours and minutes remain displayed continuously for 2 seconds: your setting is registered.

You may change the display.

Renault Clio. Display A


If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock must be reset.

We recommend that you do not adjust these settings while driving.

READ NEXT:

 Display B

Vehicles fitted with touch-screen multimedia, navigation aid systems, telephones, etc. Refer to the separate instructions for the function to understand the special features of this equipme

 Rear view mirrors

Door mirrors with electrical adjustment With the ignition on, turn button 1: position C to adjust the left-hand door mirror; position E to adjust the right-hand door mirror; D is the

 Exterior lighting and signals

Side lights Turn the ring 2 until the symbol is opposite mark 3. An indicator light on the instrument panel will come on. Daytime running lights function (front lights only) Dependin

SEE MORE:

 Flow control solenoid valve: Removal - Refitting

DP0 Do not drain or remove the automatic gearbox in order to remove the flow control solenoid valve REMOVAL I - REMOVAL PREPARATION OPERATION Place the vehicle on a two-post lift (see 02A, Lifting equipment, Vehicle: Towing and lifting). Disconnect the battery (see 80A, Battery, Battery: Remov

 Rear Seat Frames And Mechanisms

Single unit rear bench seatback: Removal - Refitting REMOVAL I - REMOVAL PREPARATION OPERATION Remove the single unit rear bench seat base (see 76A, Rear seat frames and mechanisms, Single unit rear bench seat base: Removal - Refitting, 76A-6). II - OPERATION FOR REMOVAL OF PART CONCERNED R

© 2016-2025 Copyright Renault Clio Owners Club