Renault Clio: On-board computer: general information

On-board computer 1

Depending on the vehicle, this includes the following functions:

• distance travelled;
• journey settings;
• information messages;
• operating fault messages (connected to the warning light);


• warning messages (connected to the warning light);


• vehicle settings customisation menu.

  All these functions are described on the following pages.

Display selection keys 2 and 3

Scroll through the following information upwards (key 2) or downwards (key 3) by pressing briefly and successively (the display depends on the vehicle equipment and country).

1. total mileage and trip mileage recorder;
2. fuel used;
3. average fuel consumption;
4. current fuel consumption;
5. estimated range;
6. distance travelled;
7. average speed;
8. distance before service;

• service counter;
• oil change counter;

9. Reset the tyre pressure
10. Cruise control and speed limiter programmed speed
11. Clock and temperature
12. Trip log, operating faults and information message readout

Resetting the trip mileage

With “trip mileage recorder” selected on the display, press button 2 or 3 until the mileage recorder resets to zero.

Resetting the journey parameters (reset button)

With one of the trip parameters selected as the display, press and hold button 2 or 3 until the display resets

Interpreting some of the values displayed after resetting

The values showing average fuel consumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. Therefore, the average fuel consumption may decrease when:

• the vehicle stops accelerating;
• the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
• when driving from an urban area onto the open road.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

READ NEXT: