Renault Clio: Rear loading trim: Removal - Refitting
S85
REMOVAL
I - REMOVAL PREPARATION OPERATION

- Remove:
- the rear parcel shelf,
- the centre rear parcel shelf (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the clips (2).
- Remove the rear end panel central trim assembly.

- Unclip the clips (3).
- Remove the emergency spare wheel flap (4).

- Remove:
- the bolts (5),
- the retaining hooks.


- Remove:
- the bolts (7),
- the centre rear parcel shelf supports.


- Gently lift the luggage compartment tray (9).


- Detach the rear side sections (11) of the luggage
compartment.
- Remove the luggage compartment tray through the
tailgate by bending it slightly (this operation requires
two people).

- Remove the soundproofing.

- Remove the luggage compartment tray mounting (12).

- Remove:
- the bolt (13),
- the load stop bracket.


- Remove the load stop floor by unclipping it towards
the rear (15) (this operation requires two people).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit:
- the load stop floor (this operation requires two people),
- the bolts (14),
- the load stop bracket,
- the bolt (13),
- the luggage compartment tray mounting (12),
- the soundproofing,
- the luggage compartment tray (this operation requires
two people),
- the trim (10),
- the bolts (8).
- Attach the rear side sections (11) of the luggage
compartment tray.
- Refit:
- the centre rear parcel shelf supports,
- the bolts (7) and (6),
- the retaining hooks,
- the bolts (5),
- the emergency spare wheel flap (4).
- Attach the clips (3).
- Refit the rear end panel central trim assembly.
- Attach the clips (2).
II - FINAL OPERATION.
- Refit:
- the centre rear parcel shelf, (1)
- the rear parcel shelf.
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the front speaker (see Front speakers:
Removal - Refitting) (MR 392, 86A, Radio).
Unclip the door mirror trim piece (1).
II - OPERATION FOR REM
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Special features of vehicles fitted with manual
window winders
Unclip the winder handle (1) using a pair of unclipping
pliers (protect the door
SEE MORE:
Protection and Switching Unit: Removal - Refitting
IMPORTANT
Never apply pressure to the engine compartment
connection unit joint face (risk of moisture entering).
If the joint face is damaged, the unit will need to be
replaced.
REMOVAL
I - REMOVAL PREPARATION OPERATION
In the event of replaceme
LEFT-HAND DRIVE, and AIR CONDITIONING or STANDARD HEATING
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the glovebox (see Glovebox: Removal - Refitting)
(MR 393, 57A, Interior equipment),
the centre console (see Centre console: Removal
- Refitting) (MR 393, 57A, Interior equipment).
© 2016-2025 Copyright Renault Clio Owners Club
