Renault Clio: Vehicle identification plate
The information shown on the vehicle identification plate should be quoted on all correspondence or orders.
The presence and location of the information depends on the vehicle.
Vehicle identification plate A
- Manufacturer name.
- EC design number or approval number.
- Identification number.
Depending on the vehicle, this information is also given on marking B.
- MAM (Maximum Authorised Mass).
- GTW (Gross train weight: vehicle fully loaded, with trailer).
- MPAW (Maximim Permissible Weight) for front axle.
- MPAW on rear axle.
- Reserved for related or additional entries.
- Diesel exhaust emissions.
- Paint reference (colour code).
READ NEXT:
Engine identification plate
Please quote the information on the
engine plate or label A in all correspondence
or orders.
(Location varies depending on engine)
Engine type.
Engine suffix.
Engine number.
Dimensions
Five-door version
Estate version
Engine specifications
Weights
The weights indicated for a basic vehicle without options: they vary
depending on the your vehicle’s equipment. Consult
your approved Dealer.
* Towing weight (towing a caravan, boat, etc.)
SEE MORE:
Sequential gearbox gear lever: Removal - Refitting
K9K, and JA5
REMOVAL
I - REMOVAL PREPARATION OPERATION
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the gear lever cover (1) using a screwdriver.
Disconnect the gear lever lighting connector (2).
Driver's front side door wiring: Removal - Refitting
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see 88A, Wiring harness, Wiring: Precautions
for the repair, 88A-5).
REMOVAL
I - REMOVAL PREPARATION OPERATION
Raise the window fully.
Switch off the ignition.
Disconnect the battery
© 2016-2025 Copyright Renault Clio Owners Club
