Renault Clio: Pre-postheating unit: Removal - Refitting

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Preheating / Pre-postheating unit: Removal - Refitting

K9K

Renault Clio. Pre-postheating unit: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Remove:
- the battery (see Battery: Removal - Refitting),
- the battery tray (see Battery tray: Removal - Refitting) (MR 392, 80A, Battery).

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Pre-postheating unit: Removal - Refitting

Remove the pre-postheating unit mounting bolt (8).

Renault Clio. Pre-postheating unit: Removal - Refitting

Disconnect the pre-postheating unit connector (9).
Remove the pre-postheating unit.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Connect the pre-postheating unit connector.
Refit the pre-postheating unit.
Tighten to torque the pre-postheating unit mounting nut (9 Nm).

II - FINAL OPERATION.

Refit the battery (see Battery: Removal - Refitting)

SEE MORE:

Front bumper wiring: Connector access

FOG LIGHTS I - LOCATION OF CONNECTORS R 33 connector (front end panel/front bumper connection). II - ACCESS TO CONNECTORS IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair,

Front seat: Stripping - Rebuilding

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 1 IMPORTANT Before carrying out any work on a safety or proximity system component, lock the airbag computer using the Diagnostic tool. When this function is activated all the ignition lines are disabled and the airbag warning light on the instrument pan

Renault Clio: Pre-postheating unit: Removal - Refitting

READ NEXT:

Heater plugs: Removal - Refitting

Antipollution

Exhaust gas recirculation: List and location of components

SEE MORE:

Front bumper wiring: Connector access

Front seat: Stripping - Rebuilding