Renault Clio: Emergency brake assist

This system supplements the ABS and helps reduce vehicle stopping distances.

Operating principle

The system is for detecting an emergency braking situation. In this case, the braking assistance immediately develops maximum power and may trigger ABS regulation.

ABS braking is maintained as long as the brake pedal is applied.

Hazard warning lights switching on

Depending on the vehicle, these may light up in the event of sudden deceleration.

Braking anticipation

Depending on the vehicle, when you rapidly release the accelerator, the system anticipates the braking manoeuvre in order to reduce stopping distances.

When using the cruise control:

Operating faults

When the system detects an operating fault the message “CHECK BRAKING SYSTEM” appears on the instrument panel along with the warning
light.

Consult an approved dealer.

These functions are an additional aid in the event of critical driving conditions, enabling the vehicle behaviour to be adapted to suit the driving conditions.

However, the functions do not take the place of the driver. They do not increase the vehicle’s limits and should not encourage you to drive more quickly. Therefore, they can under no circumstances replace the vigilance or responsibility of the driver when manoeuvring the vehicle (the driver must always be ready for sudden incidents which may occur when driving).

READ NEXT:

 Hill start assistance

This function assists the driver when starting on hills. It prevents the vehicle from rolling backwards, depending on the slope, by automatically applying the brakes when the driver lifts his/her

 Speed limiter

The speed limiter function helps you stay within the driving speed limit that you choose, known as the limit speed. Controls Main “On/Off” switch. Limit speed activation, storage

 Cruise control

The cruise control function helps you to maintain your driving speed at a speed that you choose, called the cruising speed. This cruising speed may be set at any speed above 20 mph (30 km/h

SEE MORE:

 Exhaust: List and location of components

PIPE ASSEMBLY D4F, and 740 or 742 or 764 (ZC1) cutting area between the catalytic converter and the expansion chamber (ZC2) cutting area between the expansion chamber and the silencer D4F, and 784 or 786 (ZC1) cutting area between the expansion chamber and the silencer K4J (ZC1) cutting area betw

 High pressure pipe between rail and injector: Removal - Refitting

K9K, and 764 or 772 WARNING Before starting work on the vehicle, make sure you have: a new blanking plug kit (part no. 77 01 476 857), cleaning wipes (part no. 77 11 211 707), cleaning product (part no. 77 11 224 188). WARNING Parts always to be replaced: all the high-pressure pipes which ha

© 2016-2025 Copyright Renault Clio Owners Club