Renault Clio: Parking brake cables: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

DRUM BRAKE

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Parking brake cables: Removal - Refitting

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

Renault Clio. Parking brake cables: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

 

II - FINAL OPERATION.

DRUM BRAKE

 

READ NEXT:

 Brake servo: Check

RIGHT-HAND DRIVE There is no "RENAULT" tool to check the braking assistance circuit. Use a vacuum pump fitted with couplings, part numbers 7701349942 and 7700105874 with hose part number 8200027352

 Anti-lock Braking System

 Hydraulic unit without ESP: Removal - Refitting

LEFT-HAND DRIVE WARNING Prepare for the flow of fluid, and protect the surrounding components. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towin

SEE MORE:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear wheels (see 35A, Wheels and tyres, Wheel: Removal - Refitting, 35A-1). Unclip the speed sensor

 Master cylinder: Removal - Refitting

F4R or K4J or K4M or K9K or M4R, and LEFT-HAND DRIVE WARNING Prepare for brake fluid outflow, to prevent damage to the mechanical parts and bodywork around the braking system. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR

© 2016-2025 Copyright Renault Clio Owners Club