Renault Clio: Five door and estate versions

Reversing lights and rear fog
lights 12
Open the boot lid.

Unclip cover 13 and remove it.

Turn bulb holder 14 fully anticlockwise
and change the bulb.
To reassemble, proceed in the reverse
order to removal.
When the bulb has been changed,
make sure you refit the cover 13 correctly.
Reversing lights
Bulb type: H21.
Rear fog lights
Bulb type: H21.

High-level brake light 15
Consult an approved dealer.
| The bulbs are under pressure
and can break when
replaced.
Risk of injury. |

Number plate lights 16
- Unclip light 16 by pressing tab 17;
- remove the light cover to gain access
to the bulb.
Bulb type: W5W.

Side indicator lights 18
Consult an approved dealer.
READ NEXT:
Courtesy light
Unclip the lens 1 (using a flat-bladed
screwdriver or similar).
Remove the bulb concerned.
Bulb type: W5W.
Luggage compartment light
Unclip the light 2 by pressing the
Replacing the battery
When the message “KEYCARD
BATTERY LOW” appears on the instrument
panel, replace the RENAULT card
battery, press button 1 pulling on emergency
key 2, then unclip the
Fuses in passenger compartment A
If any electrical component does not
work, check the condition of the fuses.
Unclip the access flap A.
To comply with current legislation, or
as a
SEE MORE:
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2) to unclip the high level
brake light.
Partially remove the raised brake light using a flat-blade
I - PREREQUISITES FOR WHEEL BALANCING
Wheel balancing is a measurement operation.
Several conditions must be met to achieve a reliable
result in a single operation.
The wheel balancer must be installed in accordance
with the manufacturer's instructions.
It is essential to calibrate the bala
© 2016-2025 Copyright Renault Clio Owners Club
