Renault Clio: Front left-hand wiring: Connector access

I - LOCATION OF CONNECTORS

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

II - ACCESS TO CONNECTORS

IMPORTANT

Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

WARNING

To prevent damaging the connectors, consult the disconnection procedure (see Connector: Disconnection and reconnection) (Technical Note 6015A, 88A, Wiring).

1 - Access to the R 107 connectors

LEFT-HAND DRIVE

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

RIGHT-HAND DRIVE

Renault Clio. Front left-hand wiring

2 - Access to the R 374 connector

Renault Clio. Front left-hand wiring

3 - Access to the R 67 connector

Renault Clio. Front left-hand wiring

Renault Clio. Front left-hand wiring

4 - Access to the R 33 connector

Renault Clio. Front left-hand wiring

READ NEXT:

 Front left-hand wiring: Removal - Refitting

LEFT-HAND DRIVE IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5).

 Engine wiring: Connector access

I - LOCATION OF CONNECTORS R 67 connector (Engine wiring harness/front left-hand wiring connection). Depending on the engine, connection R 67 is composed of three or four connectors. K4J or K4

 Engine wiring: Removal - Refitting

SEE MORE:

 In case of puncture

Depending on the vehicle, a tyre inflation kit or emergency spare wheel is provided (refer to the following pages). If the emergency spare wheel has been stored for several years, have it checked by your Dealer to ensure that it is safe to use. Vehicle fitted with an emergency sp

 B-pillar upper trim: Removal - Refitting

C85 REMOVAL REMOVAL PREPARATION OPERATION Remove: the complete rear bench seat, the rear wing panel lining (see 71A, Body internal trim, Rear panel lining: Removal - Refitting, 71A-32). Remove: the bolt (1), the seat belt. Unclip the height adjustment device (2). Rem

© 2016-2025 Copyright Renault Clio Owners Club