Renault Clio: Engine oil level: topping up, filling
Topping up/filling

The vehicle must be parked on level
ground and the engine should be cold
(for instance, before the engine is started
up for the first time in the day).
Before performing any
action in the engine compartment,
the ignition must
be switched off by pressing
the engine stop button (please see
the information on “Starting, stopping
the engine” in Section 2). |

- Unscrew cap 1;
- top up the level (as a guide, the capacity
between the minimum and
maximum reading on the dipstick 2
is between 1.5 and 2 litres, depending
on the engine);
- wait for approximately 10 minutes to
allow the oil to flow into the engine;
- check the level using the dipstick 2
(as described above).
Once the operation has been completed,
ensure that the dipstick is pushed
in as far as it will go and that the cap is
completely screwed in.

In order to prevent splashback, it is
recommended that a funnel be used
when topping up/filling with oil. |
Do not exceed the max level and
do not forget to refit cap 1 and dipstick
2. |
Oil change

Service interval: refer to the
Maintenance Service Booklet for your
vehicle.
Oil change capacity
Please refer to the maintenance document
for your vehicle, or contact an authorised
dealer.
Always check the engine oil level using
the dipstick, as explained previously (it
should never fall below the minimum
level, or be over the maximum level on
the dipstick).
READ NEXT:
Refer to the Maintenance Service
Booklet for your vehicle.
Filling: take care when
topping up the oil that
no oil drips onto engine
components - risk of fire.
Remember to refit th
With the engine switched off and on
level ground, the level when cold must
be between the MINI and MAXI marks
on reservoir 1.
Top this level up when cold before it
reaches the MINI mark.
SEE MORE:
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensioners).
IMPORTANT
To avoid any risk of triggering when working on or
near a pyrotechnic component (ai
K9K, and 764 or 772
IMPORTANT
Consult the safety instructions and cleanliness
advice and the operation recommendations before
carrying out any repairs (see Diesel injection:
Repair precautions).
IMPORTANT
Before carrying out any work on the injection system,
check using the Diagnostic tool :
that
© 2016-2025 Copyright Renault Clio Owners Club
