Renault Clio: Rear wing light: Removal - Refitting
Renault Clio III (2005-2013) Service Manual / Electrical Equipment / Rear Lighting / Rear wing light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART CONCERNED
- Open the luggage compartment.
- Remove the bolts from the rear wing light (1).
- Remove the rear wing light.
- Disconnect the connector from the rear light on the wing.
- Remove the rear light.
- If replacing the rear light, remove the bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the rear light, refit the bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
- Connect the connector for the rear light on the wing.
- Position the rear light on the wing using the centring devices (2).
- Refit the bolts for the rear light on the wing.
- Close the luggage compartment.
K85
REMOVAL
OPERATION FOR REMOVAL OF PART CONCERNED
- Open the luggage compartment.
- Remove the bolts from the rear wing light (1).
- Remove the rear wing light.
- Disconnect the connector from the rear light on the wing.
- Remove the rear light.
- If replacing the rear light, remove the bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- If replacing the rear light, refit the bulbs (see 81A, Rear lighting, Rear light bulb: Removal - Refitting, 81A-7).
- Connect the connector for the rear light on the wing.
- Position the rear light on the wing using the centring devices (2).
- Refit the bolts for the rear light on the wing.
- Close the luggage compartment.
READ NEXT:
Rear light bulb: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the rear light on the wing (see 81A, Rear
lighting, Rear wing light: Removal - Refitting, 81A-5).
B85 or C85 or S85, and DOCUMENTATION
PHASE 1
U
3rd brake light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2)
High level brake light bulb: Removal - Refitting
K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the tailgate spoiler (see Tailgate spoiler: Removal - Refitting),
the high level brake light (see 81A, Rear lighting,
3rd brake light: Rem
SEE MORE:
Tyre Pressure Monitor
Tyre pressure monitor: List and location of components
TYRE PRESSURE SENSOR
The system consists of:
four pressure sensors (1) built into the valves (one per
wheel); the sensors transmit a radio signal,
a computer (2) which collects, decodes and processes
sensor signals, and then determines whi
Wheel: Balancing
I - PREREQUISITES FOR WHEEL BALANCING
Wheel balancing is a measurement operation.
Several conditions must be met to achieve a reliable
result in a single operation.
The wheel balancer must be installed in accordance
with the manufacturer's instructions.
It is essential to calibrate the bala
© 2016-2025 Copyright Renault Clio Owners Club
