Renault Clio: Rear parcel shelf

Removal

Renault Clio. Removal


Renault Clio. Removal


To refit, proceed in the reverse order to removal.

Maximum weight on rear parcel shelf: 25 kg, evenly distributed.

Utility version

Renault Clio. Utility version


Unclip mountings 3 on either side of the parcel shelf, then remove it via the boot.

To refit it, proceed in the reverse order to removal.

Do not place any objects, especially heavy or solid objects on the luggage compartment cover. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.

READ NEXT:

 Luggage compartment cover: estate version

To remove the flexible section of the luggage compartment cover 1 Pull handle 2 gently to release the pins from their mounting points located on each side of the luggage boot. Guide the lugg

 Boot storage

Mobile floor When fitted to the vehicle, it can be used to make loading easier. Note: if you need to access the ISOFIX ring and/or the net ring at the bottom of the boot, open flap 3.

 Transporting objects in the boot

Always position the objects transported so that the largest surface is against: The rear bench seatback for normal loads (example A). The front seatbacks with the rear seatbacks

SEE MORE:

 Five-door version

Side lights/brake and direction indicator lights Open the boot lid and remove screws 1. The bulbs are under pressure and can break when replaced. Risk of injury. To release the light unit, start by moving the exterior edge away to a sufficient extent (movement A) t

 Oxygen sensors: Removal - Refitting

D4F, and 740 WARNING Do not use any product designed to improve electrical contact in the injection computer connectors and oxygen sensors and on the oxygen sensor body. Failure to respect this advice prevents the oxygen sensor from operating correctly and results in failure to comply with the emis

© 2016-2025 Copyright Renault Clio Owners Club