Renault Clio: Scuttle panel grille: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Scuttle panel grille: Removal - Refitting

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Scuttle panel grille: Removal - Refitting

Renault Clio. Scuttle panel grille: Removal - Refitting

REFITTING

I - REFITTING PREPARATION OPERATION

Note: Check that the windscreen and the scuttle panel grille are clean before refitting.

II - REFITTING OPERATION FOR PART CONCERNED

Renault Clio. Scuttle panel grille: Removal - Refitting

III - FINAL OPERATION.

Renault Clio. Scuttle panel grille: Removal - Refitting

READ NEXT:

 Tailgate spoiler: Removal - Refitting

K85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove: the blanking covers (1), the nuts (2). Unclip the tailgate spoiler at (3). Disconnect: the high level brake light connecto

 Scoop under the scuttle panel grille: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the scuttle panel grille (see 56A, Exterior equipment, Scuttle panel grille: Removal - Refitting, 56A-1). Remove the trim under the scuttle pane

 Door mirror: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the trim (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove: the sealing foam (2), the bolts (3) the door mirror. Disconnect th

SEE MORE:

 Fuses

Fuses in passenger compartment A If any electrical component does not work, check the condition of the fuses. Unclip the access flap A. To comply with current legislation, or as a precaution, you can obtain an emergency kit from your approved dealer containing a set of spar

 Oil level sensor: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Move the air inlet hose to one side. Disconnect the connector from the oil level sensor. II - OPERATION FOR REMOVAL OF PART CONCERNED Rem

© 2016-2025 Copyright Renault Clio Owners Club