Renault Clio: To lock the system

Renault Clio. To lock the system


NB: if the tool kit does not lock in place, check the tightness of nut 3 and the correct positioning of handle 4.

Special features

The emergency spare wheel holder should always be present when you are driving even when the wheel itself is not present: risk of water entering the vehicle.

If you have to release it when it is not holding a wheel, push the centre of the wheel holder towards the ground while pressing handle 4.

It is essential to lock the nut so that the wheel is held securely.

The system should only be used with the original vehicle wheels or identical wheels.

READ NEXT:

 Tyre inflation kit

The kit repairs tyres when tread A has been damaged by objects smaller than 4 mm. It cannot repair all types of puncture, such as cuts larger than 4 mm, or cuts in tyre si

 Tools

The tools included in the tool kit depend on the vehicle. Tool kit A is located in the tray under the luggage compartment carpet. Lift the cover and remove it. Wheelbrace 1 Locks or

 Wheel trims - wheel

Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2. To refit it, align it with valve 2. Push the retaining hooks in fully,

SEE MORE:

 Rear suspension spring: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove the rear wheels (see 35A, Wheels and tyres, Wheel: Removal - Refitting, 35A-1). II - OPERATION FOR REMOVAL OF PART CONCERNED Unpick the wheel speed sensor wiring har

 Starting, Stopping the engine

Remote control RENAULT card When you get into the vehicle, insert the RENAULT card integrated key, pointing towards you, fully into the card reader 2. To start, press button 1. If a gear is engaged, depress the clutch pedal to start the vehicle. Hands-free RENAULT card The RENAULT

© 2016-2025 Copyright Renault Clio Owners Club