Renault Clio: Ignition

READ NEXT:

 Ignition: Specifications

D4F or F4R or K4J or K4M or M4R Coils: Removal - Refitting D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 8

 Plugs: Removal - Refitting

D4F, and 740 - D4F, and 784 or 786 Spark plug electrode gap REMOVAL I - REMOVAL PREPARATION OPERATION D4F, and 784 Remove the turbocharger air outlet pipe bolt (2) from the inlet distributor. R

 Petrol Injection

SEE MORE:

 Sequential gearbox: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, run command " Discharge pressure accumulator " AC081. To confirm the pressure drop, read the " Hydr

 Bonnet lock: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the front bumper (see 55A, Exterior protection, Front bumper: Removal - Refitting, 55A-1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the bonnet catch bolts (1). Remove the clip (2) using offset adjusting pliers. Unclip the sheat

© 2016-2025 Copyright Renault Clio Owners Club